All articlesMaintenance

Boiler Servicing Explained: What's Checked and Why It Matters

A plain-English guide to annual boiler servicing in the UK — what an engineer actually does, what it costs, and how to stay safe.

Tom Bradshaw20 October 20268 min read
Boiler Servicing Explained: What's Checked and Why It Matters

An annual boiler service is one of those jobs that's easy to put off and expensive to ignore. A ten-minute check each year keeps your heating safe, efficient and far less likely to pack in on the coldest day of the year.

What an engineer actually does

A proper service takes 30–60 minutes. The engineer will check the flue and combustion, clean key components, test the pressure and controls, and confirm the boiler meets current gas safety standards. You should get a written report at the end.

What it costs in the UK

Expect to pay roughly £70–£120 for a straightforward service from a Gas Safe registered engineer. Be wary of quotes far below this — a proper service takes time and the right kit. Always check the engineer's Gas Safe ID card before they start.

If a service takes ten minutes and no tools come out of the van, it probably wasn't a service.

Signs you shouldn't wait for the annual check

  • The flame is yellow or orange rather than crisp blue
  • The boiler keeps losing pressure or cutting out
  • You can smell anything unusual near the appliance
  • Soot or scorch marks around the casing

If you ever suspect a gas or carbon monoxide problem, turn the boiler off, open windows and call the National Gas Emergency Service on 0800 111 999. Fit an audible carbon monoxide alarm — it's the single best £20 a home can spend.

This article is general guidance for UK homeowners and isn't a substitute for professional advice. For gas, electrical or structural work, always use a qualified tradesperson.

Get quotes for this job

Up to 3 local tradespeople will get in touch with a quote — no obligation.

More in Maintenance

View all